LED Bånd Sæt/ LED Stripe, 300 LED, 5 Meter, RGB-Set-5050 Multicolor (både til inden- og udendørs brug)
Multicolor LED bånd sæt med 150 dioder på en rulle med 5 meter.

BEMÆRK: Her køber du LED bånd som Sæt inkl. strømforsyning/transformer (AC220V; DC12V; EU-standard 36W 3A) og fjernbetjening. Mange andre steder sælger kun LED bånd og strømforsyning skal købes ekstra!

Lagerstatus  På lager Forventet leveringstid inden for 1-3 hverdage Du må ikke blive skuffet, hvis du allerede har den i morgen!

Producentens beskrivelse (på engelsk)

LED Stripe Set-5050 Waterproof (for indoor and outdoor lightening usable) * Multicolour

Product Highlights:
# Very low power consumption / Energy class A
# Life time ≥ 50000 hours
# Lenght 5 meters
# Flexible and easy to attach
# No generation of heat
# For inside and outside lighting (Decoration lighting / Backing lighting for signal letters / Lighting for stairways/entrances/exits, auditorim walkways, staircases, etc. / Lighting for shops, theaters, cinemas, aircraft cabins, amusement parks, etc. / Lighting for archway, canopy, bridges)

Technical Specifications:
# LED type: SMD5050
# Colour: multicolour (RGB)
# LED number: total 150 pcs. (30 LED/m)
# Beam angle: 120°
# Measure L/W/H: 5000mm / 10mm / 2.5mm
# Brightness: R = 210Lm / G = 480Lm / B = 180Lm
# Working Voltage: DC12V (AC220V)
# Power consumption: total 36W (7.2W/m)
# Degree of protection: IP65 (waterproof)
# Life time: ≥ 50000 hours
# Dimmable: yes

Colours / Colour programms:
# Static Colours: White, Red, Orange, Yellow, Deep Yellow, Light Yellow, Green, Ligtht Green, Blue, Deep Blue, Light Blue, Pale Blue, Pink, Purple, Cyan (=Blue-Green), Brown
# Colour Changing Programms: 7-colour jumpy changing, Red-Green-Blue-colour changing, 7-colour gradually changing, all colours gradually changing

Package Contents:
# LED Stripe RGB-Set-5050
# Power adapter (AC220V; DC12V; EU-standard 36W 3A)
# 24-button remote control
# Controller

Generel Information / Handling of LED-Stripes:
# Voltage for LED stripes is DC12V (make sure before connection or LED stripe could be permanently damaged).
# Always use approved switch power supply (protection against short circuit and/or overloading).
# The switch power supply must work in a dry and ventilative place.
# Do not crush or cut open the LED stripes. Static loading is forbidden and avoid excessive machine vibration.
# Collision and squeezing are forbidden to avoid damages to the LED stipes.
# For the waterproof LED stripes the finish lead must be ensured as waterproof to prevent a short circuit.

Vi er godkendt af e-handelsfonden - for dig betyder det at - Du modtager aldrig spam fra Easy-Pix.eu - Vores betalingsløsning er godkendt så du først betaler når varen ER afsendt - Du har maksimal forbrugersikkerhed. - Tryg og etisk korrekt handel og færden på nettet